Page 1
STEAM STATION SIS 7040 Product code 1806802...
Page 2
Keep the power cable away from hot Our GRUNDIG Household Appliances meet surfaces and open flames. all the applicable safety standards; thus if the Do not pull on the power cable to disconnect the...
Page 3
SAFETY AND SET-UP _______________________ Always keep hair, clothing and other objects away from the appliance while it is in use in order to prevent injury and damages. Warning - Danger of Burns! Do not touch the hot soleplate. Do not lean over the iron while it is in use.
SIS 7040. Cable storage holder with clamping bracket Please read the following user notes carefully to en- sure you can enjoy your quality GRUNDIG product Power cable with power plug for many years to come. Removable water tank...
OPERATION _______________________________ Preparation Depending on the type of fabric, turn the temperature control dial to one of the Remove all packaging material, stickers and following settings: protective foil and dispose of them according to the applicable statutory regulations. Clean the outer parts of the appliance as described in the section “Cleaning and Care“.
OPERATION _______________________________ Push the on/off switch to switch on the - The red power indicator light and the steam ironing station. blue steam button indicator light LOW go out. - The power indicator lights up red and the blue steam button indicator light blinks Let the appliance cool down in a location that on LOW is safely out of reach of children.
OPERATION _______________________________ Vertical steam ironing When there is insufficient water left in the Note water tank the steam generation stops Vertical steam ironing can be applied to and the water filling indicator lights up, hanging curtains or clothes (suits, jackets followed by an audible beep.
INFORMATION ____________________________ Tips for Ironing Never clean the soleplate with chemicals, steel wool, wood or other abrasive cleaning agents. Prior to ironing, always check the garment label Prior to each cleaning, turn the device off and to ensure the correct temperature setting is on disconnect the power plug from the power the iron.
INFORMATION ____________________________ Note Environmental note This product has been manufactured with high- Instead of using the key provided, you can also quality parts and materials which can be reused use a flat head screwdriver or a coin. and are suitable for recycling. Therefore, do not dispose of the product with Let the water drain out into a sink.
Need help?
Do you have a question about the SIS 7040 and is the answer not in the manual?
Questions and answers