Table of Contents
Advertisement
Document number R2019-10-01 Span Calibration Guide
3.2.5 Type the desired capacity for the system (200.0kg)
3.2.6 Press down arrow.
3.2.7 Set cell resolution to 0.5kg by pressing ENTER.
3.2.8 Press down arrow
using numerical key pad and press ENTER to store.
"Test Weight". By using numerical key pad type the
actual test weight that will be used for calibration
and press ENTER
be at least one third of the total capacity of the
scale or about equal to the typical loads that will be
weighed, whichever is greater.
www.ritchie-uk.com
Revision
Page
Display will show
. Display will show the
to store. The weight should
02
7 of 16
Advertisement
Table of Contents
Need help?
Do you have a question about the DRAFT PRO and is the answer not in the manual?
Questions and answers