Table of Contents
Advertisement
Document number R2019-10-01 Span Calibration Guide
3.3.5 Select Span Cal, by using the grey button at the side.
3.3.6
Select 0.5 resolution.
Press enter
Use down arrow to select 0.5 resolution.
Press enter to confirm selection.
3.3.7
Enter capacity (full scale) of 200.0 using the keypad,
press enter to confirm.
3.3.8 Carry out zero weight calibration. DO NOT touch
weight scale while calibration is being carried out.
Press enter to start calibration. Screen will display "No
load measurement is done"
Screen display:
to access the drop down box.
www.ritchie-uk.com
Revision
02
Page 12 of 16
Advertisement
Table of Contents
Need help?
Do you have a question about the DRAFT PRO and is the answer not in the manual?
Questions and answers