Olimpia splendid B0873 Instructions For Mounting And Use Of Electronic Kits page 25

0.6 - KIT INSTALLATION ON THE FAN COIL
a. Undo the screws (1a) and remove the cover (1b)
of the box (1) (fig.1).
b. Wedge in the locks (2) in the specific slots (3)
located on the side of the appliance (fig.2).
c. Secure the box (1) to the appliance by means of
the two screws (4) (fig.2).
2
3
3
d. Connect the ground cable to the appliance struc-
ture using the supplied screw (minimum force for
screwing is 4 N) (fig.3).
e. Connect the water probe connector (S) on the
appliance and check that the water probe (S) is
correctly inserted in the cockpit located on the
battery (fig.3).
1
1
2
2
3
1b
1a
1a
4
1
4
S
EN - 5
Bi2 Air AR