Cleaning And Care - Dualit baby 11040 Instruction Manual & Guarantee

13 14
If any water is left in the Do not pour unused or
Steriliser after use, pour excess water out at any
away and replace with fresh other angle.
water before starting a new
sterilising cycle. Caution:
Pour water towards a
front corner to ensure that
no water goes into the
Air Vent. Risk of fire and
electric shock.
The Steriliser needs to cool down after a function cycle before it can be used
again for a new sterilising process.
Note: If you leave the lid on your Steriliser the items will remain sterilised
for up to 24 hours. The Steriliser needs to cool down for 10 minutes after a
function cycle before it can be used again for a new sterilising process.
Warning: If you turn off the sterilisation cycle before it finishes, the items will
not be sterile.
WWW.DUALIT.COM/REGISTER
DON'T FORGET
TO REGISTER
YOUR PRODUCT OR BY POST
15
If you wish to turn the
Steriliser off during a
sterilisation cycle, turn the
Control Dial to "O" setting
and unplug.
12
CLEANING & CARE
Before cleaning make sure the appliance is switched off,
unplugged and allowed to cool. Dualit recommends cleaning
your Steriliser regularly.
2
1
Unplug the Steriliser from Over a sink, pour away any
the mains and allow to cool water remaining in the Water
down completely before Recess. Note: Pour water
cleaning. towards a front corner
to ensure that no water
goes into the Air Vent.
Risk of fire and electric
shock.
4
Wipe the external surfaces of the Base with mild detergent (washing up liquid) and
a soft, damp cloth. Note: Do not submerge in water and ensure no water goes into
the Air Vent. Do not use sharp articles or metal tools to touch the Element as it may
cause electric shock. Do not submerge the Base, the power cord or the plug in water
or other liquid or position under a water tap. Do not use sharp, abrasive or aggressive
cleaning agents, bleach, or scouring pads to clean the Steriliser. The use of such
cleaning implements may affect the life of the Steriliser. Note: When not in use
clean and dry the Steriliser and store in a cool, dry place.
3
Clean all surfaces of the
Upper Rack, Lower Rack,
and Lid with mild detergent
(washing up liquid) and a
soft, damp cloth.
Note: Do not use sharp,
abrasive or aggressive
cleaning agents, bleach,
or scouring pads to
clean the Steriliser. The
use of such cleaning
implements may affect
the life of the Steriliser.
13