HAMPTON BAY 5LGZ6526-V4 Use And Care Manual page 7

Assembly (continued)
3
Setting up the main frame
□
Attach one bracket (O) onto the top of each post (A) with one bolt (AA) using hex wrench (II).
□
Please have a free standing ladder ready for ease of assembly.
□
Use two bolts (AA) to attach the B side of the assembled long beams to the outside right corner post (A) and two bolts (AA) to attach the
C side of the assembled long beams to the outside left corner post (A). (See illustration below)
□ Use two bolts (AA) to attach the D side of the assembled short beams to the outside right corner post (A) and two bolts (AA) to attach the
E side of the assembled long beams to the outside left corner post (A). (See illustration below)
□ Repeat the above procedures until the frame is up.
B
E
D
4
Assembling the corner roof tube
□
Snap one lower corner roof tube (L) into each upper corner roof tube (M).
□
Snap the other end of each corner roof tube (M) into the receivers M of vent hub (P).
P
D
C
C
M
L
M
E
B
M
L
7
Please contact 1-855-HD-HAMPTON for further assistance.
AA
M
M
L
O
AA
L
HAMPTONBAY.COM