1. Manuals
  2. Brands
  3. BroadMobi Manuals
  4. Wireless Router
  5. R800A
  6. User manual

BroadMobi R800A User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Interface
key
Illustrate
Power key
Long press over 5 seconds to power on and long press to power off
WPS
Press to active the WPS
Reset
The Reset button is on the opposite side of the machine. If you forget
Administrator password or Wireless network key, you can press the
Reset key to restore factory default settings.
LED Indication
Indicator
Color
Green
Amber
Power
Blue
LED
Amber
Red
SMS LED
Blue
Blue
Signal
LED
R800A User Manual
Working Status
Solid: booting up the device
Blink: Charging
Solid: Battery High(100%-60%) or Charge Completed
Solid: Battery Middle (60%-15%)
Solid: Battery too low nearly shut down (<15%)
Blink: New SMS
Blink: Register to LTE(not connect)
Solid: Connected to LTE network
Blink:
Turn
on-0.5s
Turn
off-0.5s

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R800A and is the answer not in the manual?

Questions and answers

Related Manuals for BroadMobi R800A

Summary of Contents for BroadMobi R800A

  • Page 1 R800A User Manual Interface Illustrate Power key Long press over 5 seconds to power on and long press to power off Press to active the WPS Reset The Reset button is on the opposite side of the machine. If you forget Administrator password or Wireless network key, you can press the Reset key to restore factory default settings.

  • Page 2: Installation

    Green Blink: Register to 3G(not connect) Solid: Connected to3G network Purple Blink: Register to2G(not connect) Solid: Connected to2G network Blink: No Service/Device Error Blue Solid: No Client Blink: Client is actived Blink: WPS is active Blink: WiFi LED Turn on-0.2s Turn off-0.1s Installation...
  • Page 3 Wi-Fi wireless Internet access In order for a Wi-Fi device to establish a connection with the R800A for the first time, you will need to select the R800ASSID (Wi-Fi name) & enter the relevant Wi-Fi...
  • Page 4 password, which you may find in the following ways: Method one: on the nameplate view the default SSID and Wi-Fi passwords Method Two: Login management page view...
  • Page 5 1. Computer, open your browser, input http://192.168.0.1 and enter. ●The default Account is admin ●The default Password is admin Enter the Account and Password, login administration pages 2. Enter the Wi-Fi menu, view the default SSID and Wi-Fi password. The default 2.4G SSID is R800A_2.4G.The default 5G SSID is R800A_5G.The Wi-Fi password are both 1234567890.
  • Page 6 SSID and a higher safety factor Wi-Fi passwords Install the driver and connecting the device USB Connection: Windows 7 for example 1. Keep R800A powering on, Plug the device into your computer, it will shows like the following pictures step by step.
  • Page 7 2. Double-click the , wait for the installation to complete...
  • Page 8 3. Check the network card is installed correctly, like the following pictures Establish Wi-Fi connection: you must ensure that the computer equipped with a wireless network card. If the computer showed the presence of Wi-Fi...
  • Page 9 (The following will be 2.4GWi-Fi as an example) 1. In the Wi-Fi list, select the SSID consistent with R800A Wi-Fi, click Connect 2. Enter the correct Wi-Fi password, click OK 3. Wait a moment, Wi-Fi connection is displayed next to the name, Wi-Fi...
  • Page 10 connection is successful 4. Check the network card is installed correctly, like the following pictures...
  • Page 11 ●Home First part of the main display settings and network status information, such as IPad dress, SIM card status, type and quality of the network signal, whether it is roaming, with or without a new message, and traffic statistics, and system uptime, and so on. ●Wizard...
  • Page 13 1. Connection Dialing Mode: Select the Auto Mode, after you turn on R800A without additional operations, the device will automatically connect to the network; select the Manual Mode, you need to manually connect to the network after opening theR800A management...

  • Page 14: Apn Setting

    2. APN Setting: You can customize the network configuration or manually add the new APN and set defaulting. 3.4G/3G/2GModem...
  • Page 15 There are four types of networks can be choose: Auto is 4G/3G/2G, Leanly is using only 4G, WCDMA Only is using only 3G,GSM Only is using only 2G. 5. PIN Open your PIN, if you reboot the device, you need to login management page, and the page will prompted to enter the correct PIN code, you can use the SIM card.
  • Page 16 ●LAN 1. LAN We can change IP address in this page. 2. DHCP DHCP Mode: Select the server mode, the device can be done using a DHCP server; choose none, which is off the server function. Start / End IP address: Changing DHCP assigned IP and IP segments.
  • Page 17 Lease Time: Each is assigned a time to use the IP Leased Hosts: the R800A each wireless device list and USB device can view the Host name, MAC Address, IP Address, information about the Remaining Time. ●SMS When using SIM card to access network, you could also send text messages at the time. You can send, receive, reply, forward, and save test messages.
  • Page 18 You can also control the opening and closing of 5GWi-Fi, and set up the Wi-Fi Channel .The 5GWi-Fi of R800A supports 802.11 A/N/AC Mixed protocol. We set the Channel Width to reach HT20/40/80 Mixed. The highest 5GWIFI rate can reach...
  • Page 19 867Mbps. 2. WPS R800A supports two kinds of WPS authentication, PBC and PIN. Default is PBC authentication. (The following will be 2.4GWi-Fi as an example) WPS PBC authentication: If device Wi-Fi Enabled, device supports WPS (Wi-Fi Protected Setup) and you have...
  • Page 20 R800A, you may use the following available procedures for quick access to Wi-Fi. Open the WPS: WPS can be opened by two methods. The first method is, enter the management interface page, press the “Apply “button, and open the WPS.
  • Page 21 Select the SSID of the device and connect. Then you can see like the following picture.
  • Page 22 The second method, Select the SSID of the device and connect Press the WPS button on theR800A, activate the WPS. It will lasting 120 seconds. Then you can see like the following picture.
  • Page 23 WPS PIN authentication: The connection to the R800A is achieved by inputting the relevant PIN key into the enrollee PIN text box, which you may find in the wireless network card. When you applied, it will lasting 120 seconds. The premise is that the wireless network card or...

  • Page 24: Mac Filter

    R800A. Allow list Stations: Opposite with Deny list Stations. It only allows the devices in the list to connect to the R800A, other wireless devices are unable to connect to the R800A Disable: It means close the function of the MAC Address Filter.
  • Page 25 Show the information of wireless devices which are connected to the 2.4GWi-Fi and 5GWi-Fi. ●Security 1. Firewall Firewall configuration: You can Disable or Enable the Firewall function. Also you can setting the matching packets rule to receive or reject.
  • Page 26 You can add the rule in the list. ●System 1. About R800A displays some basic information, such as device name, firmware version, IMEI, baseband version.

  • Page 27: Firmware Upgrade

    2. Configuration Restore the factory settings, all the personal configuration will be deleted, all configuration pages will be restored to the factory defaults. 3. Firmware Upgrade...

  • Page 28: Date And Time

    Select the file to update the software 4. Password Modify the login password for administrator interface. Also you can setting the time to logout the automatically. 5. Date and Time...

  • Page 29: Power Saving

    You can synchronize the time with the host, you can also select the time zone 6. Language You can change the UI language in this page. 7. Power saving...
  • Page 30 You can change the time of sleep mode or deep sleep mode. In this page you also can disable the Power saving function. Sleep mode: System will enter into the sleep mode, when there is no Wi-Fi client connected to this device.

  • Page 31: Safety Warning

    Safety Warning Caution:RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents