1. Manuals
  2. Brands
  3. BroadMobi Manuals
  4. Wireless Router
  5. BMC R708A
  6. User manual

BroadMobi BMC R708A User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BMC R708A User Manual
Interface
key
Illustrate
Power key
Long press over 5 seconds to power on and long press to power off
WPS
Press to active the WPS
Reset
The Reset button is on the opposite side of the machine. If you forget
Administrator password or Wireless network key, you can press the
Reset key to restore factory default settings.
LED Indication
Indicator
Color
Green
Amber
Power
Blue
LED
Amber
Red
SMS LED
Blue
Blue
Signal
Green
LED
Purple
Working Status
Solid:booting up the device
Blink:Charging
Solid:Battery High(100%-60%) or Charge Completed
Solid:Battery Middle(60%-15%)
Solid: Battery too low nearly shutdown(〈15%)
Blink:NewSMS
Solid: Regiester to LTE(not connect)
Blink: Connected toLTE network
Solid: Regiester to 3G(not connect)
Blink: Connected to3G network
Solid: Regiester to2G(not connect)
Blink:
Turn
on-0.5s
Turn
off-0.5s

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BMC R708A and is the answer not in the manual?

Questions and answers

Related Manuals for BroadMobi BMC R708A

Summary of Contents for BroadMobi BMC R708A

  • Page 1 BMC R708A User Manual Interface Illustrate Power key Long press over 5 seconds to power on and long press to power off Press to active the WPS Reset The Reset button is on the opposite side of the machine. If you forget Administrator password or Wireless network key, you can press the Reset key to restore factory default settings.

  • Page 2: Installation

    Blink: Connected to2G network Solid:No Service/Device Error Blue Solid:No Client Blink: Client is actived Blink: WPS is actived Blink: WiFi LED Turn on-0.2s Turn off-0.1s Installation Follow the diagram to install the SIM card and SD card Tips: Always switch the device off and disconnect the charger before removing the battery.
  • Page 3 Your battery has been partially charged at the factory. If the device indicates a low charge, do the following: 1. Connect the charger to an outlet. 2. Connect the USB charger plug to your device’s USB port. 3. When the device indicates a full charge, disconnect the charger from the device, then from the outlet.
  • Page 4 BMC R708A Usage R708A support 4G/3G networks. Insert the SIM card, Wi-Fi devices and the computer can access the Internet through R708A, enjoy high-speed network services.Smart phones, tablet computers, game consoles and other Wi-Fi devices can be connected with the R708A Wi-Fi connection for Internet access.
  • Page 5 Method Two: Login management page view 1.Computer, open your browser, input http://192.168.0.1 and enter. ●The default Account is admin ●The default Password is admin Enter the Account and Password, login the administration pages 2.Enter the Wi-Fi menu, view the default SSID and Wi-Fi password...
  • Page 6 ●The default SSID is R708A ●The default Wi-Fi Password is 87654321 ★ Recommend that you start using R708A administration pages after setting a convenient landing memorizing SSID and a higher safety factor Wi-Fi passwords Install the driver and connecting the device USB Connection:Windows 7 for example 1.
  • Page 7 2. Double-click the , wait for the installation to complete...
  • Page 8 3. Check the network card is installed correctly,like the following pictures Establish Wi-Fi connection:you must ensure that the computer equipped with a wireless network card. If the computer showed the presence of Wi-Fi...
  • Page 9 connectivity, the wireless LAN is available. Otherwise, you need to check your wireless network card is working properly. 1. In the Wi-Fi list, select the SSID consistent with R708A Wi-Fi, click Connect 2. Enter the correct Wi-Fi password, click OK 3.
  • Page 10 WebUI ●Home First part of the main display settings and network status information, such as IPaddress, SIM card status, type and quality of the network signal, whether it is roaming, with or without a new message, and traffic statistics,and system...
  • Page 11 uptime,and so on. ●Wizard You can quickly change the LAN configuration, set the APN , and change the SSID \ password through the wizard function.

  • Page 12: Apn Setting

    ●WAN 1.Connection Dialing Mode: Select the Auto Mode, after you turn on R708A without additional operations, the device will automatically connect to the network; select the Manual Mode, you need to manually connect to the network after opening the R708A management page.
  • Page 13 3.4G/3G Modem There are four types of networks can be choose: Auto is 4G/3G, LTE Only is using only 4G, WCDMA Only is using only 3G. 4.PIN Open your PIN, if you reboot the device, you need to login management page,and...
  • Page 14 the page will prompted to enter the correct PIN code, you can use the SIM card. PIN / PUK code supplied with the SIM card provided by your carrier, please consult your carrier. 4. PLMN Public Land Mobile Network have two mode, one is automatic,the other is manual.You can search the current network manually and register.
  • Page 15 DHCP Mode: Select the server mode, the device can be done using a DHCP server; choose None, which is off the server function. Start / End IP address: Changing DHCP assigned IP and IP segments. Lease Time: Each is assigned a time to use the IP LeasedHosts: the R708A each wireless device list and USB device can view the Host name, MAC Address, IP Address, information about the Remaining Time.
  • Page 16 you can setting the storage location of messages, and so on. We can operating the SMS in this page. ●Wi-Fi 1.Basic We can setting the wifi configuration in this page, like B/G/N mode, Channel, SSID,WIFI KEY and so on. 2.WPS R708A supports two kinds of WPS authentication, PBC and PIN.
  • Page 17 If your WiFi Enabled ,device supports WPS (WiFi Protected Setup) and you have forgotten or do not wish to enter your password to connect to your R708A, you may use the following available procedures for quick access to WiFi. Open the WPS: WPS can be opened by two methods.
  • Page 18 Select the SSID of the device and connect. then you can see connecting process The second method is, Select the SSID of the device and connect Press the WPS button on theR708A, activate the WPS. It will lasting 120 seconds. then you can see connecting process.
  • Page 19 WPS PIN authentication: The connection to the R708A is achieved by inputting the relevant PIN key into the enrollee PIN text box, which you may find in the wireless network card. When you applied, It will lasting 120 seconds. The premise is that the wireless network card or the clients must support WPS PIN authentication.

  • Page 20: Mac Filter

    3. MAC Filter Deny list Stations: If you add the computers or wireless devices MAC address into the list, it can prohibiting the computers or wireless devices connect to the R708A.The computes or wireless devices MAC address which are not in the list can able to connect to R708A.
  • Page 21 Showthe information of wireless devices which are connected to the R708A. ●Security 1. Firewall Firewall configuration: You can Disable or Enable the Firewall function. Also you can setting the matching packets ipv6/ipv4 rule to receive or reject.
  • Page 22 You can add the rule in the list and click apply confirm it. 2. NAT The R708A supports NAT/IPSEC VPN Pass Through/PPTP VPN Pass Through/L2TP VPN Pass Through/Webserver WWAN Access. When some hosts inside the private network have already allocated the local IP address, that is, only the private address used in the private network, but now they want to communicate with the host on the Internet (no need to encrypt), we can use the NAT method.
  • Page 23 Receive all the data from external network interface forwarded to“DMZ IP address” Enable DMZ: If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer. Note: Placing a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort.

  • Page 24: Firmware Upgrade

    Restore the factory settings, All the personal configuration will be deleted, all configuration pages will be restored to the factory defaults. 3.Firmware Upgrade The page allows you to upgrade the firmware. It have two mode. Remote Server: When you power on the device , if you insert the SIM card and register the internet .it can automatic check whether there is a new version, if there is a new version was detected, can be directly upgrade.

  • Page 25: Date And Time

    Modify the login password for administrator interface. Also you can setting the time to logout the UI automatically. 5.Date and Time You can synchronize the time with the host , you can also select the time zone 6.Language...

  • Page 26: Power Saving

    You can change the UI language in this page. 5.Power saving You can change the time of sleep mode or deep sleep mode. In this page you also can Disable the Power saving function. Sleep mode: System will enter into the sleep mode, when there is no Wi-Fi client connected to this device.
  • Page 27 BATTERIES ACCORDING TO THE INSTRUCTIONS FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents