Table of Contents
Advertisement
Quick Links
• Single phase for 230 Vac 2 motors
• Universal control unit for 1 or 2 motors swing
• 4 limit switches
• Separate slow down
START-S4XL
1
2
3
4
40
20
Press button "CODICI" and "TIMES"
5
6
7
8
9 10 11
6
60
4
80
2
100
0
PhASE
FORCE
DISPLACEMENT
1 2 3 4 5 6 7 8 9 10
DIP A
Reset of the control board:
for 10 seconds
26 27 28 29 30 31
12 13 14 15 16 17 18 19 20 21 22 23 24 25
Radio-receiver
6
8
4
8
10
2
10
MAX
MIN
OFF
SLOW
DOWN
1 2 3 4 5 6 7 8 9 10
DIP B
OPEN
CLOSE
CODES
DIP C
Remove of the inputs
1 2 3 4 5 6 7 8
TIMES
CODE
Advertisement
Table of Contents
Related Manuals for nologo START-S4XL
Summary of Contents for nologo START-S4XL
- Page 1 • Single phase for 230 Vac 2 motors • Universal control unit for 1 or 2 motors swing • 4 limit switches • Separate slow down START-S4XL Radio-receiver TIMES CODE PhASE FORCE SLOW DISPLACEMENT DOWN 1 2 3 4 5 6 7 8 9 10...
-
Page 2: Environmental Protection Measures
Foreword Introduction START-S4XL is the ongoing evolution of the START-S4 electronic control This manual provides all the specific information you need to fa- unit, completely compatible and equipped with a sophisticated electronic miliarize yourself with and correctly operate your unit. Read it circuit that controls the motive force, detecting any obstacles at any point very carefully when you purchase the instrument and consult it in its operation. -
Page 3: Standard Installation
It is important to make an important risk analysis of the “ MACHINE” and of the customers requirements in order to decide how many products should be installed. All NOLOGO photocells dispose of a synchronisation system which permit to avoid any interference between two couples of photocells (look the photocell’s instructions for details) In the diagram , photocells “FOTO A”... -
Page 4: Description Of The Connections
Description of the connections 230 Vac Neutral 230 Vac electrical power supplì 50 Hz Neutral EARTH EARTH 230 Vac Phase 230vac electrical power supply 50 Hz Phase Lamp Outputs for LAMP (flashing light electronic card) or 230 VAC COURTESY LIGHT Lamp M 1 Com Output for the connection of motor 1 COMMON POLE M 1 M 1 Opening Output for the connection of motor 1 POLE OPEN MOTOR 1 M 1 Closing... - Page 5 Connections and setting up 1 3 230 Vac control board power supply 4 11 230 Vac motors power supply and 230Vac lamp 12 18 Accessories power supply and services and securities inputs 19 20 Output for 12 Vac 50 Hz 1 A electrical lock, is powered for 3 seconds only by opening 21 ...
-
Page 6: Functions And Adjustments
Functions and adjustments The control board has several micro-switches to activate a lot of functions in order to fi nd suitable solutions for the user and to make the installation more safety. 1 2 3 4 5 6 7 8 9 10 DIP A Use of the DIP A By every order it inverts: open and close. It closes automatically at 1-OFF 2-OFF automatic 1 the end of the pause time 9 10... - Page 7 1 2 3 4 5 6 7 8 9 10 DIP B Setting up with DIP B This function can able the “ Man present” function, The START com- 1-ON mand opens the closing PEDONALE command. The motors stop man present when the command has been released.
- Page 8 1 2 3 4 5 6 7 8 DIP C remove the inputs Setting up and enables of the inputs in the DIP C FCC M2 1-ON Exclusion of the inputs closing limit switches of motor. No.2 9 10 9 10 9 10 9 10 FCA M2...
- Page 9 Memorisation of the remote controls The control board can accept different type of codes, the first memorized remote control, define the type, consequentely, other type of codes (different from the first remote control) cannot be learnt. The control board accept standard codes from 12 to 64 bit and only the fixed part of the code for the rolling code HCS©, but using the DIP 13 ( 3 of DIP B) the rolling code counter can be checked. In this way the remote control cannot be copied. The memory capacity is about 200 rolling code remote controls. The first memorized remote control defines the type of code that the receiver should learn, consequentially, the next remote controls should have the same type of code. FULL CANCELLATION of the memory This operation cancel all previous memorized codes.
- Page 10 TIME LEARNING The control board START S4XL has two way to plan the working time. NORMAL WAY: use this way when all doors are the same and the motors are the same. ADVANCED SYSTEM: use this way when you want top lan the exactly slown down and / or the doors have different functions ways.
- Page 11 5.2 TIME LEARNING: ADVANCED SYSTEM The gate is in closed position Porre e lasciare in ON l’interruttore 10 del DIP A The gate is in closed position The fi rst motor OPENS Push the button TIMES TEMPI Push the button TIMES (or START) If the slow down are active The fi rst motor slows down when opening (trimmer see.
- Page 12 TIME LEARNING: Pause (fastest way) The gate is in pause TIMES Push and release the TIMES button THE L.E.D. for opening and closing are switched on The new PAUSE TIME run. The gate CLOSES. End of the fast learning time Press and release the TIMES button and PAUSE TIME.
-
Page 13: Declaration Of Ce Conformity
EB TEChNOLOGY SRL Adress: Corso Sempione 172/5 The undersigned Ernestino Bandera, 21052 Busto Arsizio VA Italy Administrator Product’s name: START-S4XL Single phase for 230 Vac DECLARES ThAT: 2 motors ThE PRODUCT COMPLIES with what is outlined in the European Community directive: EC DIRECTIVE 98/37 ISSUED BY THE EUROPEAN PARLIAMENT AND COUNCIL... - Page 14 START-S4XL START-S4XL START-S4XL risulta conforme a tutte le norme tecniche complies with all technical requirements sont conformes à toutes les normes tech-...