Set Up Your Device; Insert The Sim Card And Battery - Blackberry Curve 8900 Getting Started Manual

Set up your device

Insert the SIM card and battery

Your SIM card is a small rectangular plastic card that stores important information about
your wireless service. Your SIM card might already be inserted in your BlackBerry® device.
Depending on your wireless service provider, you might need a PIN code for your SIM card.
For more information, contact your wireless service provider.
1. Hold up the release button for the battery cover and lift off the battery cover.
2. If the SIM card is already inserted, proceed to step 8.
3. If the battery is inserted, remove the battery.
4. Remove the SIM card from any packaging.
5. Hold the SIM card so that the metal contacts on the SIM card face down and the
cutoff corner points toward the top-left corner of the device.
6. Slide the SIM card into the holder so that it lies flat below the plastic guide.
7. Insert the battery so that the metal contacts on the battery align with the metal
contacts on your device.
8. Slide the metal notches at the top of the battery cover into the slots at the top of the
device.
5