Table of Contents
Advertisement
8.
Low Blue Light: The display uses the low blue light panel. It complies with TÜV
Rheinland Low Blue Light Hardware Solution certification under factory reset/default
setting (Low Blue Light=Standard, Brightness: 80%, Contrast: 50%, CCT: 6500K).
9.
ACM: Turn ACM on or off.
-----------------------------------------------------------------------------------------------------------
Note: Set to "On", will be based on the current screen to dynamic contrast adjustment.
10. HDR: can control off, HDR-400 and auto, the default is off, set to auto will automatically
detect and deal with HDR signal.
--------------------------------------------------------------------------------------------------------
Note: 1. When HDR = Auto, the Modes will also be automatically set to "HDR".
2. When HDR = Auto or HDR-400, some parameters :(ACM, Gamma, Contrast,
Blue Light, Black Boost...) functions is gray out and disable, and if you change other
adjustable parameters, the "Modes" will not jump to "User" Mode.
11. Light Sensor: Light Sensor can choose: (Off, Level 1, Level 2 and Level 3), Off is
default, Level 3 brightness automatically adjust the maximum range, Level 2 brightness
automatically adjust the range is moderate, Level 1 brightness automatically adjust the
minimum range.
12. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology
can simulate high-resolution images by boosting the pixel density of the original source
to make images sharper and clearer..
Hide quick links:
Advertisement
Table of Contents
