Recording Information - Neen Peritone Instruction Manual

Recording Information

To record and store the information for one patient over a number
of sessions using the LOCK function mode
•
Remove the battery compartment cover.
•
Using a thin rod (end of the lead wires) press the concealed
LOCK button once (see diagram on page 9) and you will hear two
beeps, this indicates the unit is locked. A padlock icon will appear
on screen.
•
A series of sessions can then be undertaken. After each session
press the SET button consecutively to read the statistics for that
particular session. After reading all the statistics, press the ESC
button. The information at this point will be lost for good.
•
To view the statistics over a number of sessions press the
concealed LOCK button once to unlock the unit. You will hear one
beep. All session data will have been added together to form the
overall average reading for the given period. This includes
the number of trials performed and average muscles activity.
•
Press the SET button consecutively to view these statistics.
•
After reading all the statistics, press the ESC button.
The information at this point will be lost for good.
•
Don't forget to LOCK the unit again if you wish to record the
average statistics of another series of sessions.
If you are linked to a PC read the software instructions for
downloading patient recorded details.
NOTE: Programs that are not completed will not be recorded.
NOTE: While the unit is in operation only the volume and threshold
can be changed. Recording only occurs by pressing the start button
and when the program is completed.
PERITONE Instruction Manual - GB
14