Kitchen Timer - Whirlpool AMW 524 Instructions For Use Manual

F
1(a)
1(a). Turn the multifunction knob to the zero
position.
2(b). Press the Select button (3 seconds) until
the left-hand digit (hour's) flicker.
3. Turn the +/- knob to set the hours.
4. Press the Select button again. (The two right
hand digits (minutes) flicker).
5. Turn the +/- knob to set the minutes.
6. Press the Select button again.
The clock is set and in operation.
F
1
1. Turn the multifunction knob to the zero
position.
2. Turn the +/- knob to set the time to measure.
The timer autostarts the countdown after 1
second.
IFU AMW 524 GB.indd 7
cLOcK
2
6
4
3
5

KITcHeN TIMer

2
Keep the door open while setting
the clock. This gives you 10 minutes
to complete the setting of the
clock. Otherwise, each step must be
accomplished within 60 seconds.
Note: When the appliance is first plugged in or
after a power failure, the display is blank. If the
clock is not set, the display will remain blank
until the cooking time is set.
If you wish to remove the clock from the
display once it has been set,
follow steps (a) & (b) and press the Stop button
(c).
To reinstate the clock, follow the above
procedure.
Use this function when you need a kitchen
timer to measure exact time for various
purposes such as cooking eggs, pasta or
letting the dough rise before baking etc.
An acoustic signal will be heard when the
timer has finished to count down.

15/04/2009 09:46:38