Auto Functions - Whirlpool AMW 524 Instructions For Use Manual

F
1
1. Turn the multifunction knob to the Auto
position.
2. Press the Auto button to select the desired
auto function.
3. Turn the +/- knob to choose desired food
class.
4. Press the Select button (default weight is
displayed).
5. Turn the +/- knob to set the weight of the
food.
6. Press the Start button.
(A)
Adjusting doneness
When using the Auto functions (except the Jet Defrost function), you also have the
possibility to personally control the end result through the Adjust doneness feature. This
feature enables you to achieve higher or lower end temperature or longer and shorter time.
By choosing one of the Auto functions you choose the standard setting. This setting
normally gives you the best result. Perhaps the food you heated became too warm to eat at
once. You can easily adjust this before you use that function the next time. This is done by
selecting a Hi or Low level with the +/- knob.
Turn the +/- knob to set your Personal Preference.
Note:
The Personal Preference can only be set or altered during the first 20 seconds of operation.
Auto forced Air combi: The Personal Preference can only be set or altered during the first 20
seconds of the preheat period (food classes 3, 4 and 5).

IFU AMW 524 GB.indd 12

AUTO fUNcTIONS

4
2
3
(A)
5
+ increases the end temperature.
- decreases the end temperature.
The auto functions on this oven need
to know the net weight of the food. The
oven will then automatically calculate the
needed time to finish the defrost / cooking
procedure.
6
If the weight is lesser or greater than
recommended weight:
Use the "cook and reheat with microwaves" to
cook / defrost the food.
Note: In Auto forced air combi, some of the
programs do not have any weight input.
Frozen foods:
If the food is warmer than deep-
freeze temperature (-18°c), choose
lower weight of the food.
If the food is colder than deep-
freeze temperature (-18°c), choose
higher weight of the food.
15/04/2009 09:46:39