Darim SM2000 User Manual page 5

SM2000 MULTIVIEWER USER'S GUIDE
Features:
 Various video sources all in one system displayed in real time
 Displays up to 48 image windows on a single display
 Supports major compression standards (H.264/AVC/MPEG-4 Part 10, MPEG-2, WM9-VC1)
 Accepts mixture of various inputs types from ASI, IP, QAM/QPSK or SD SDI
 Supports NTSC and PAL at SD and HD resolutions
 Compatibility with most of IRDs, Video Servers, Encoders which provide IP stream output
 Supports various aspect ratio of input signals
 Mixes various audio streams
 Audio bar-graphs for easy audio control
 Lost signal detection
 ASI signal error detection
Specification:
Supported Inputs

LAN: Dual-Port Gigabit Ethernet Controller 10BASE-T, 100BASE-TX, and 1000BASE-T
(RJ45) (H.264/AVC/MPEG-4 Part 10, MPEG-2, WM9-VC1)

HD-SDI: 1.485Gbps or 1.485/1.001Gbps, 75Ω, BNC (1080/60i, 1080/59.94i, 1080/50i, 720/60p,
720/59.94p, 720/50p) Audio embedded

SD-SDI: 270 Mbps, 75Ω, BNC (525/60 (NTSC), 625/50 (PAL)) Audio embedded

Analog composite: 1.0 Vp-p, 75Ω, BNC (525/60 (NTSC), 625/50 (PAL)) (MPEG4 ASP Level 3),
Audio line in (PCM, aLaw /uLaw)

ASI: 270 Mbps, 75Ω, BNC

DVI: DVI-I connector (Digital or Analog): Resolution: SVGA 800x600, XGA 1024x768, SXGA
1280x1024, WXGA+(1280x960) Refresh Rate: 60Hz, 59.94Hz, 50Hz
Supported Streams

IP (H.264/AVC/MPEG-4 Part 10, MPEG-2, WM9-VC1)

ASI (MPEG-2, H.264/AVC)

DirectX Capture Sources
Video Output

DVI: DVI-I connector, 2 outputs. Resolution: 1920 x 1200, 1360 x 768, 1440 x 900, 1680 x 1050,
1920 x1080, 1280x720
Refresh Rate: 60Hz
Split-screen Patterns

Full screen, user-selected screen layout (up to 48 video panes)

Fixed predefined number of display layouts
Copyright © 2009 Darim Vision Co, All Rights Reserved
- 5 -