Darim SM2000 User Manual page 10

SM2000 MULTIVIEWER USER'S GUIDE
stream will be shown in the bottom part of the pane in the MultiViewer control panel. The audio /
button allows enabling/disabling audio stream.
The active (highlighted) area of video panes is displayed on the output control monitor. To switch between the
areas, select with the mouse button the required one using the MultiViewer control panel. The Full Screen
button in the MultiViewer layout panel allows displaying all four areas of the video panes simultaneously on the
output control monitor (up to 48 panes in case of 12 panes per each area selection).
The Sound button in the MultiViewer layout panel serves for enabling/disabling the audio bar-graphs for easy
audio control on the output monitor. When this option is set, every pane will have its own audio bar-graph
reflecting the state of a current audio stream. Every video pane may also contain the information about the
channel name for easy identification of various streams on the output monitor. To activate this option for all panes
press the Text button. The audio level slider to the right of the MultiViewer layout panel allows controlling the
volume of all audio streams. To quit the MultiViewer control panel application, press the Exit button in its bottom
right corner.
Figure 4. MultiViewer layout panel
Copyright © 2009 Darim Vision Co, All Rights Reserved
- 10 -