Setting Up Your Handheld; Insert The Sim Card; Insert The Battery; Charge The Battery - Blackberry 7510 Getting Started Manual

Setting up your handheld

Insert the SIM card

Your SIM card contains important information
about your wireless service. Your SIM card might
be inserted already.
Warning: Turn off your handheld before you insert
or remove the SIM card. Do not scratch, bend, or
expose the SIM card to static electricity or wet
conditions.
1. Press the battery cover release button.
2. Slide off the battery cover.
3. If the battery is inserted, remove it.
4. Slide the SIM card holder toward its hinge to
unlock it.
5. Lift the SIM card holder.
6. Remove your SIM card from its packaging.
7. Insert the SIM card into the holder so that
the notches align.
2
Release button

Insert the battery

Warning: Use only the battery that Research In
Motion specifies for use with your handheld. Refer
Safety and Product Information
to the
that accompanied your handheld for more
information on using the battery safely.
1. Press the battery cover release button.
2. Slide off the battery cover.
3. Insert the battery so that the connectors
align.
4. Replace the battery cover. If the battery is
charged, your handheld turns on and a
dialog box appears.
5. Click OK.
If the date and time are incorrect, see "How do I
correct the date and time?" on page 7 for more
information.

Charge the battery

Using the travel charger
1. Connect the smaller end of the USB cable to
your handheld.
booklet