Invicta Cannele Instructions Manual page 104

Step 2: Attach the hopper (mounting hardware not included)
Locate
Find the final position for the hopper and
drill holes to allow it to be attached
Realise
Step 3: Adjust the hopper level and tighten
AN 6421501- DT 07.06 .17
Attach the hopper to the wall using
screws and plugs (not supplied) without
tightening
NO!
Use the adjustable levellers to ensure it is
YES!
level.
Final tightening
Use the appropriate hardware
for your support
Page 3 - 8