Samsung 5 Series Quick Setup Manual page 2

Step 5 :
Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language,
set the clock mode, and launch the TV's channel memorizing process. It also
displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right
arrow buttons on your remote. To make a selection, press the
button. To skip a screen, press the
To turn on your TV, press the POwer
POwer button on the TV. To run Plug & Play, follow these steps:
Select language of the OSD.
language
1. On the Language screen, select the language for the On Screen Display
(OSD) using your remote control, and then press
Home Use screen appears.
2. Select Home Use, and then press
Demo, the TV will reset your picture and audio settings every 30 minutes. After
you press enTerE button, the Antenna Source screen appears.
3. If your TV is only attached to an antenna, select Air. If your TV is only
attached to cable and you have no cable box, select Cable. If your TV is
attached to an antenna and cable with no box, select Auto. When done,
press enTerE button on your remote. The Select Cable System screen
appears.
If your TV is attached to a cable or satellite box, skip Steps
IMPORTANT:
3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4,
according to the directions for your cable or satellite box.
4. If your TV is attached to a cable system and you have no cable box, you
must select your cable system type. If you have Digital cable, you must
select the cable system type for both Analog and Digital.
Remote Control Buttons and Functions:
✎
This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons.
Press number buttons for direct access to channels.
Press to select additional digital channels broadcast by
the same station. For example, to select channel 54-3,
press 54, press -, and then press 3.
Displays the channel list on the screen.
Quickly selects frequently used functions.
Selects the on-screen menu items and changes the
Colored buttons for use in the
Use these buttons in the
( : Controls recording on Samsung recorders with the
enTerE
MenU button.
button on the remote or press the
Plug & Play
english
español
: english
Français
U Move E enter
button. The
enTerE
enTerE button. If you select Store
Turns the TV on and off.
Adjusts the volume.
View the Media Play.
values seen on the menu.
Return to the previous menu.
Channel List, Media Play
menu, etc.
and modes.
Media Play Anynet+
Anynet+ feature)
After you have selected the cable system type, select Start, and then
press the enTerE button on your remote.
Most cable systems are Standard
✎
about what kind of cable system you have, contact your cable compa
5. The TV memorizes the available channels. This process can take up to 45
minutes. After the TV has memorized the channels, the Clock Mode scree
appears.
6. Choose the Clock Mode. Select Auto if you have a digital channel in your
area. Select Manual if you don't, or if you have a cable or satellite box. Wh
done, press enTerE
If you select Manual, the clock setting screen appears.
✎
7. Select the daylight saving time setting: Off, On, or Auto, and then press
enTerE button.
After the time zone screen, The connection method for best HD screen quality
8.
is displayed. Press Right arrow button on your remote to view each screen in
succession. Press the Blue button to skip this section.
9. The enjoy your TV screen appears. and then press
Basic Functions
Selecting a Source
To watch a movie on your Blu-ray player or watch
your favorite TV show, you must select the correct
source. A source is a device, such as a Blu-ray/DVD
player, a cable/satellite box, antenna or a cable TV
input. Sources can be connected to your TV through
the HDMI, DVI, Component, Composite, or D-sub
connections, or through the Antenna or Cable In
connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the
you press the SOUrCe button, you change to a different source.
Press to switch between the sources (Blu-ray player,
cable box, DVD player, etc.) connected to your TV.
Return to the previous channel.
PRE-CH
Cut off the sound temporarily.
Change channels.
CHLIST
Displays the main on-screen menu.
MENU
MEDIA.P FAV.CH
Displays Favorite Channel Lists on the screen.
TOOLS
Press to display information on the TV screen.
INFO
EXIT
RETURN
Exit the menu.
S.MODE SLEEP MTS
S.MODe: Selects the sound mode.
P.MODE P.SIZE CC
SleeP: Setting the Sleep Timer.
MTS: Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
P.MODe: Selects picture mode.
P.SIze: Choose the picture size.
CC: Controls the caption decoder.
(STD) systems. If you are not sure
button. The Daylight Savings screen appears.
enTerE
SOUrCe button on your remote. Each tim
MEDIA.P
TOOLS
RETURN
S.MODE
P.MODE
button.
PRE-CH
CHLIST
MENU
FAV.CH
INFO
EXIT
SLEEP MTS
P.SIZE CC