Nortel BayStack 425-24T Manual page 18

16
Back panel
The switch back panel is shown in
the back panel.
Figure 5 BayStack 425 back panel
Table 4 Components on the BayStack 425 back panel
Connect the AC power cord to the back of the switch, and then connect the cord to
an AC power outlet.
The BayStack 425 switch does not have an AC power switch. When you connect
the AC power cord to a suitable AC power outlet, the switch powers up
immediately.
Warning: Disconnecting the AC power cord is the only way to turn off AC power to this
device. Always connect the AC power cord in a location that can be reached quickly and
safely in case of an emergency. (For translations of this statement, see
215658-B
1
100-240 V-
50-60Hz 2A
Item Description
1 AC power receptacle
2 Cascade Up and Down Connectors
Figure 5. Table 4 describes the components on
2
Cascade
Down Up
11110EA
page 30.)