Commissioning - Relaxxnow VTX400 User Manual

10. COMMISSIONING

Electrical connection
• Before plugging the power plug into the power outlet, make sure that the
voltage of your main power supply matches the voltage on the product label.
• Only connect the fan to a properly installed contact socket.
IMPORTANT
1. Please observe the minimum surrounding distances to walls and objects
when installing the device (30cm in ALL directions).
2. Before startup, check the condition of the power cord. If in doubt about the
condition, contact the manufacturer.
3. Position the device in an upright AND stable position.
4. Avoid laying the power cord (when positioning in the center of the room).
Avoid the cable beng a „tripping hazard" of any kind. We recommend the
use of cable bridges/covers.
5. Make sure the power cord is fully unrolled.
6. Make sure that possible objects (such as curtains, clothing, etc.) do not
obstruct the airflow.
7. Insert the batteries into the remote control. If the batteries are already
inserted into the remote control ex works, you must remove the protective
foil.
Relaxxnow 31