Wiring Diagram - Sylvania ValueLED 61877 Installation And Setup Instructions

1.
This product has 3 dimming functions available: a) Constant Current 1-10VDC dimming, b) PWM signal dimming and c) Variable
resistance dimming. Please choose the appropriate dimming function for your needs if dimming is desired.
2.
Make all wiring connections via the supplied wire leads in accordance with NEC and local codes.
3.
For units with a NEMA photocontrol receptacle, if the aiming angle will be beyond 45 above horizontal, place a continuous bead of
silicone completely around the top edge of the receptacle to seal the shorting cap or photocontrol.
MIN 75 C SUPPLY CONDUCTOR
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BAY A PERSON FAMILIAR
WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOVLED.
LES FILS D'ALIMENTATION 75 C
CE PRODUIT DOIT ETRE INSTALLE SELON LE CODE D'INSTALLATION PERTINENT, PAR UNE PERSONEE QUI CONNAIT BIEN LE
PRODUIT ET SON FONCTIONNAMENT ANINSI QUE LES RISQUES INHERENTS.

WIRING DIAGRAM:

PHOTOCELL INFORMATION:
When the photocell function is required, the photocell should be installed on the NEMA receptacle on the back of the fixture. When
the photocell function is not required, the shorting cap provided should be installed on the NEMA receptacle.
3983099