Mounting Bracket Options; Installation Instructions - Sylvania ValueLED 61877 Installation And Setup Instructions

MOUNTING BRACKET OPTIONS:

Five mounting brackets are available to choose:

INSTALLATION INSTRUCTIONS:

Mounting with Slipfitter Mount (NAED 61877) :
1. Remove the adjustment bolt located on the slipfitter bracket, run the wires through the bracket and re-install the adjustment bolt
securing both pieces of the bracket together (Figure 1).
2. Install the bracket on the fixture and secure with the screws provided (Figure 2).
3. Loosen the four locking bolts on slipfitter bracket, make all wiring connections via the supplied wire leads in accordance with
NEC and local codes, and pull the wires completely into the pole.(Figure 3)
4. Slip the mounting bracket over the pole tenon and tighten the four locking bolts to secure. (Figure 4)
5. The slipfitter bracket allows the luminaire to be adjusted up to 90° above horizontal (Figure 3). Loosen the adjustment bolt and
adjust tilt as needed and tighten adjustment bolt to lock in place.
Figure 1
Figure 3
Figure 2
Figure 4
3983099