Black Box TS030A Specifications

© 2005. All rights reserved.
Black Box Corporation.
Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: info@blackbox.com
QUICK CHECKS (ETHERNET, MULTI, BNC COAX, PRO)
Key Features
Models available to
test Thin Ethernet,
10BASE-T Ethernet,
UTP, Token Ring, and
TP-PMD.
Provides instant
verification of cabling.
Works as a standalone
unit or works
separately for
checking cables.
Unique slide method
of attaching and
detaching master unit
from remote.
Pro Quick Check
includes adapter for
testing Token Ring
Type 1 or 3 cable.
11/2/2005 #14481
1
T he Ethernet Quick Check
(TS030A) was designed
specifically for the Ethernet user
or technician. BNC and RJ-45
jacks enable continuity testing of
the two most popular trans-
mission media (10BASE-T and
10BASE2).
The unique slide-lock
mechanism joins master and
remote sections for single-
handed patch cord testing. You
can separate the units for testing
horizontal UTP runs as well as
Thin Ethernet coaxial buses.
The Multi Quick Check (TS031)
provides instant verification of
common UTP network wiring
schemes following EIA/TIA 568A
or B pairing. Ethernet 10BASE-T,
Token Ring, and TP-PMD wiring
can all be tested with this device.
Easy-to-read sequencing LEDs
verify good cabling, shorts, opens,
and miswires. A unique slide-lock
mechanism allows remote and
properly wired cables.
master to interlock for bench
testing.
With the BNC Coax Quick
Check (TS032A), you can bench-
test coaxial cabling with BNC
connectors. This device tests for
shorts and opens. Exclusive
circuitry locks onto intermittent
shorts (the most common failure
in coaxial cabling). Interseries
adapters can be used for testing
coaxial cabling using connectors
other than BNCs.
The Pro Quick Check (TS038A)
verifies cabling for Ethernet
Typical Application
Test thin Ethernet buses and patch cords, Ethernet UTP patch cords and
horizontal runs, verify UTP wiring schemes, bench-test coaxial cable
terminators, or verify UTP/FTP cabling with the model of the Quick
Check that's best for your application.
Instantly identify
10BASE-T, Token Ring, and TP-
PMD.
Sequencing LEDs on the Pro
Quick Check verify continuity of 4-
pair UTP/FTP cabling that
conforms to EIA/TIA568 A or B
pair designations.
It tests for the presence of
shield in Foil Twisted Pair (FTP) or
Token Ring Shielded Twisted Pair
(STP).
It also has a convenient slide-
lock mechanism for easy patch
cord and premise cable testing.