Advertisement
CCS Technical Documentation
Disassembly and Reassembly Instructions for Camera Module
Remove Connector Shield when cleaning contacts or
changing Camera Module.
Remove Camera Module carefully. Take care that Camera
marking shows to right side when assembling.
Shift the SRT-10 into the camera groove.
Issue 1 10/2003
Company confidential
RH-20 Disassembly and Assembly Instruc-
Camera Module is attached with four snaps into its
guidance. Place SRT-10 as shown in the picture and unlock
the snaps on both sides. Note releasing order.
Do not touch contacts and camera lens. Use always
SRT-10 for assembly and disassembly.
Take the Camera Module carefully and note the
Nokia Corporation.
RH-20
marking.
Page 17
Advertisement
