Summary of Contents for Restoration Hardware FT-143
Page 1
Revised August 19, 2009 FT-143 Provence Fountain COMPONENTS AND PARTS LIST (5 pieces) Pump Kit Parts List PK800 Pump (1) #10 rubber stopper (1) Approx 3” length of ¾” clear vinyl tubing (1) Approx 24” length of 5/8” black non-kink tubing (1)
Page 2
FT-143 Provence Fountain (5 pieces) Revised August 19, 2009 ASSEMBLY INSTRUCTIONS Two people are required for the installation of this fountain! 1. Make sure you are assembling your fountain on a level surface. 2. This fountain will need to be installed on a surface capable of holding a minimum of 1064 pounds in a 10.5 square foot area.
Page 3
FT-143 Provence Fountain Revised August 19, 2009 (5 pieces) ASSEMBLY INSTRUCTIONS Two people are required for the installation of this fountain! 11. Place a hose clamp over the 5/8” end of the tubing assembly and attach to the copper pipe in the bottom of the water feature (FT-143B).
Page 4
FT-143 Provence Fountain (5 pieces) Revised August 19, 2009 ASSEMBLY INSTRUCTIONS Two people are required for the installation of this fountain! 16. Place the Cap (FT-143A) on top of the water feature. 17. Fill the basin with approximately 30 gallons of water.
Need help?
Do you have a question about the FT-143 and is the answer not in the manual?
Questions and answers