Troubleshooting
Problem
Talking clock doesn't
sound
Settings and time
aren't stored when
the clock is disconnec-
ted from mains
It's not possible to set
any new reminders
Reminder with voice
recording is too quiet
Other information
This clock includes a recess for hanging on the wall. Please
ensure the fixing method is strong enough to bear the weight
of the clock to reduce the risk of any impact hazard.
When the clock is disconnected from mains electricity, your
pre-set information will be saved for up to a year by the
integral CR2032 battery. Once this battery runs out you can
change it by opening the flap in the rear of the clock.
Make sure the writing is on the top side of the battery.
This product comes with a 12 month from purchase warranty to
cover manufacturing defects.
Potential Cause and Solution
Talking clock is set to sound hourly
or turned off. Change the settings
for the talking clock, see how on
page 29.
Battery is flat. Replace CR2032
battery by opening battery door
on the back of the clock
The full number of reminders (16) has
been set. Delete unused reminders
to set more.
Move closer to microphone (on top
of clock) when recording. Set
volume to high on Setup Menu.
30
Need help?
Do you have a question about the Basic clock and is the answer not in the manual?
Questions and answers