Velleman HQ-Power VDPLPS36B Manual

VDPLPS36B / VDPLPS36C – LED PINSPOT 36 PROJECTOR
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VDPLPS36B / VDPLPS36C! Please read the manual thoroughly before bringing this device
into service. If the device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• A qualified technician should install and service this device.
• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified
person carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• If extension cords are used, make sure the wire gauge is appropriate to the power consumption of the device.
• Always plug in the power plug last. Never let the power plug come in contact with other cables. Never touch the
power cable with wet hands. Make sure the plug remains free of any dust.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.
3. General Guidelines
• This device is designed for professional use on stage, in discos, theatres, etc. The VDPLPS36B / VDPLPS36C
should only be used indoors with the included power adapter connected to an alternating current of max. 230VAC
/ 50Hz.
• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
• Always disconnect and do not use the device during thunderstorms.
• Make sure the housing never touches surrounding surfaces or objects.
VDPLPS36B / VDPLPS36C 1 VELLEMAN