2.
Inspection before Use
Prior to use, the probe must be carefully inspected that it is
appropriate for use.
2.1 Inspection of appropriate connection
2.1.1 Confirm that the system is correctly operating.
Refer to the instruction manual for the ultrasound diagnostic
scanner.
2.1.2 Do not attach or connect unauthorized devices or instruments
on the probe, such as unauthorized biopsy attachments.
2.2 Inspection of material surface
2.2.1 Visually inspect that the surface of the probe and head,
housing, the cable and the connector for any crack, scratch
or denaturalization. If you find any damage, do not use the
probe and contact a service support immediately.
2.2.2 Visually inspect the elasto coupler for any crack,
deformation or denaturalization. If you find any damage, do
not use the elasto coupler. If you find any damage, do not
use the elasto coupler and contact a service support
immediately.
( 5 )
Q1E-EP1370