Toyota CAMRY HYBRID 2021 Owner's Manual page 473

Select "Set Pressure" then
7
press and hold
the tire pressure warning
light blinks 3 times.
Then a message will be dis-
played on the multi-information
display.
"- -" will be displayed on the
multi-information display for the
inflation pressure of each tire
while initialization is being per-
formed.
Drive at approximately 40 km/h (25 mph) or more for approxi-
8
mately 10 to 30 minutes.
When initialization is complete, the inflation pressure of each tire will be
displayed on the multi-information display.
Even if the vehicle is not driven at approximately 40 km/h (25 mph) or
more, initialization can be completed by driving for a long time. How-
ever, if initialization does not complete after driving for 1 hour or more,
park the vehicle in a safe place for approximately 20 minutes and then
drive the vehicle again.
◆
Registering ID codes
Vehicles without a tire inflation pressure display function

Every tire pressure warning valve and transmitter has a unique ID
code. In addition to the set of tire pressure warning system sensor
ID codes initially registered to the vehicle, a second set of ID codes
can be registered.
A second set of tire pressure warning system sensor ID codes can
be registered at your Toyota dealer. When 2 sets of ID codes have
been registered, either ID code set can be selected.
Vehicles with a tire inflation pressure display function

Every tire pressure warning valve and transmitter has a unique ID
code. When replacing a tire pressure warning valve and transmitter,
it is necessary to register the ID codes.
The ID codes can be registered on
play.
CAMRY_HV_GE
CAMRY HYBRID_OM_General_OM33F09E
6-3. Do-it-yourself maintenance
until
of the multi-information dis-
471
6