Advertisement
POST INSTALLATION CLEAN-UP
Remove all construction debris. Install any accessories, shelves or doors according to manufacturer's
installation instructions.
Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent.
Stubborn dirt or stains may be removed using granular Spic and Span® mixed with water.
Painter's naphtha can be used to remove excess adhesives and/or wet oil-base paint.
AFTERCARE AND CLEANING
Always fill the tub with temperate water. Excessively hot water may cause surface damage.
Clean after use with a mild liquid household detergent cleaner. Abrasive cleaners such as Lestoil
Disinfectant (spray or concentrate), or Lysol
Disinfectant Bathroom Cleaner, or cleaning products in aerosol cans should not be used.
DO NOT USE HARSH CHEMICALS ON TUB SURFACE
Do not use wire brushes, knives or sharp objects to remove stains, cigarette tar deposits, or other
surface blemishes.
Abrasive cleaners or powders must not be used, since they will dull the surface.
Do not wax areas where you walk or stand.
Do not allow nail polish remover, acetone, dry cleaning fluid, paint remover or other solvents to come into
contact with the surface.
Clean the surrounding surface immediately after using caustic drain cleaners.
Burning cigarettes will damage the surface.
Should damage to the fixture occur, repairs can be made quickly and easily. Your distributor or builder can
provide details.
SPIC AND SPAN
is a registered trademark of The Spic And Span Company
®
LESTOIL
is a registered trademark of the Clorox Company
®
LYSOL
is a registered trademark of Reckitt Benckiser
®
WINDEX
®
is a registered trademark of S.C. Johnson & Son, Inc
MR. CLEAN
is a registered trademark of Agile Pursuits Franchising, Inc.
®
DOW
is a registered trademark of Dow Chemical Company
®
Basin, Tub and Tile Cleaner, Windex
®
, Lysol
®
®
, Mr. Clean
, Dow
®
®
®
Advertisement
