Advertisement
1
FRAMING INSTRUCTIONS
Fig. 1
16" (406 mm)
2" (51 mm)
Min Drain Clearance
8" (203 mm)
4" (102 mm)
1a. Locate studs as required. Ensure roughing-in dimensions are proper, plumb, and square (Fig. 1). It is
strongly recommended that an additional opening be provided for access to the drain components.
1b. Install drain components to the bath following the manufacturer's instructions. See the roughing-in
drawing for suggested opening size and location dimensions in specification page.
30" (762 mm)
30" (762 mm)
14"
14"
(356 mm)
(356 mm)
14-5/8"
(371 mm)
2" (51 mm)
Drain
3-1/4" (83 mm)
8-1/4"
(210 mm)
Drain Cutout
60-1/8" (1527 mm) Min
60-1/4" (1530 mm) Max
Each alcove stud
must be plumb
and square.
6" (152 mm)
(Typical)
8-3/8"
(213 mm)
20-7/8"
(530 mm)
31-1/4"
(794 mm)
Support Clip
Locations (4 total)
Advertisement
