Dell Latitude 3301 Setup And Specifications Manual page 29

Option Description
● Fn Lock—enabled by default
● Lock Mode Disable/Standard—enabled by default
● Lock Mode Enable/Secondary
Numlock Enable Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.
Full Screen Logo ● Enable Full Screen Logo—not enabled
Warnings and ● Prompt on warnings and errors—enabled by default
errors
● Continue on warnings
● Continue on warnings and errors
MAC Address
Replaces the external NIC MAC address with the selected MAC address from the system.
Pass-Through
● System Unique MAC Address (default option)
● Disabled
Virtualization support
Option Description
Virtualization This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware
Technology capabilities provided by Intel Virtualization Technology.
Enable Intel Virtualization Technology—enabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
Maintenance screen
Option Description
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
Service Tag Displays the Service Tag of your computer.
BIOS Recovery This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user
primary hard drive or an external USB key.
● BIOS Recovery from Hard Drive—enabled by default
● Always perform integrity check—disabled by default
Data Wipe This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next
boot' is not enabled by default. The following device is affected:
● Internal M.2 PCIe SSD
BIOS Downgrade This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is
enabled by default.
System logs
Option Description
Power Events Allows you to view and clear the System Setup (Power) events.
● Keep (default)
● Clear
System setup 29