•
After lifting the Vehicle, you must support the load with appropriately-rated Vehicle support stands
(such as Jack Stands)
•
The product should only be operated by authorized personnel. Keep children and untrained
personnel away from the product.
•
Keep hands and body away from all pinch points.
•
When using the product, wear appropriate work clothes and ANSI-approved safety goggles.
Do not make any modifications to the product; this voids your warranty.
•
•
Make sure all operators read and understand the Installation and Operation Manual. Keep the
manual near the device at all times.
•
Make a visual inspection of the product before using it. Do not use the product if you find any
missing or damaged parts. Instead, take the unit out of service, then contact an authorized repair
facility, your distributor, or Ranger Products at (800) 253-2363.
Symbols
Following are the symbols used in this manual:
⚠
DANGER
⚠
WARNING
⚠
CAUTION
Liability Information
BendPak Ranger assumes no liability for damages resulting from:
•
Use of the equipment for purposes other than those described in this manual.
•
Modifications to the equipment without prior, written permission from BendPak Ranger.
•
Damage to the equipment from external influences.
•
Incorrect operation of the equipment.
2-Ton Long-Reach Floor Jack
before
you begin working on the Vehicle.
Calls attention to a hazard that will result in death or injury.
Calls attention to a hazard or unsafe practice that could result in death or injury.
Calls attention to a hazard or unsafe practice that could result in personal injury,
product damage, or property damage.
4
P/N 5900387 — Rev. B2 — May 2020