Summary of Contents for Safe-n-Sound RIDE LITE LX5016 Series
Page 1
IMPORTANT: KEEP THIS BOOKLET IN A SAFE PLACE FOR FUTURE REFERENCE Series LX5016 RIDE LITE ULTRA LIGHTWEIGHT TRAVEL SYSTEM STROLLER Compatible with Britax Safe-n-Sound Unity baby capsule (sold separately) ®...
USING THE HARNESS USING THE STROLLER INSTALLING THE CLICK & GO ADAPTORS ATTACHING & REMOVING BABY CAPSULES ATTACHING & REMOVING BRITAX SAFE-N-SOUND UNITY BABY CAPSULE ® ATTACHING & REMOVING BRITAX B-SAFE 35 (NZ MARKET) FOLDING THE STROLLER CARE & MAINTENANCE GENERAL MAINTENANCE &...
Page 4
Always follow the manufactures instructions. Read all instructions carefully before assembly and use of this stroller. The correct use and maintenance of this product is essential. TO AVOID INJURY OR DEATH ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY. •...
THIS CAUTION SYMBOL IS SHOWN AT CERTAIN STEPS IN THIS INSTRUCTION MANUAL TO HIGHLIGHT THE DANGER OF BEING INJURED BY MOVING PARTS. IMPORTANT NOTES • Use great care when using the stroller on stairs, escalators, travelators or other moving surfaces. •...
SMART LIFTING TECHNIQUE This technique can be used to pick up small light loads from low levels. SIZE UP THE LOAD • Assess the load (size, shape and weight). • Assess whether the load needs to be moved; • Where is it going to be placed, check that there are no obstructions; •...
Page 7
Handle Canopy 5-Point Harness Arm Bar Release Button Folding Strap Bumper Bar Foot Rest Swivel Lock Front Wheel Release Handle Adjustment Backstrap Adjuster Folding Button Basket Frame Lock Latch Rear Wheel Release Brake Pedal Instructions for Assembly, Operation and Maintenance...
IMPORTANT NOTES PLEASE REFER TO PAGE 4 FOR SMART LIFTING TECHNIQUES. • Release the storage latch with due care and open the frame. • When opening the stroller, be aware of the danger of being injured by moving parts and locking devices during the process. keep all hands and limbs clear of these parts. •...
ATTACHING & REMOVING THE FRONT SWIVEL WHEELS CLICK CLICK CLICK CLICK PULL PULL PULL PULL A To attach each front swivel wheel, insert B To remove each front swivel wheel, press the swivel wheel and push it into the wheel the grey quick release button on the top of moulding until you hear a ‘click’...
Page 10
SLIDE ATTACHING THE CANOPY IMPORTANT NOTE The sun is very strong. DO NOT LEAVE YOUR CHILD EXPOSED TO THE SUN. The canopy or hood on this product will not give your child total protection from the harmful rays of the sun. SLIDE SLIDE ADJUST...
ATTACHING THE ARM BAR WHEN A CHILD IS IN THE STROLLER KEEP THE ARM BAR ATTACHED TO THE ADAPTORS AT ALL TIMES. SLIDE SLIDE SLIDE PULL PULL SLIDE PULL PULL PULL PULL CLICK CLICK CLICK A Stand beside the stroller and pull the B To remove the arm bar, push the red fabric back from the sides of the stroller quick release tabs in on the inside of each...
USING THE BRAKES ALWAYS APPLY THE BRAKES WHEN THE STROLLER IS STATIONARY. A The red brake lever is located on the UNLOCK BRAKE right hand side of the stroller beside LEVER the rear wheel. B To lock the rear wheels, press the brake lever down until you hear a CLICK ‘click’.
ADJUSTING THE BACKREST • THE UPRIGHT POSITIONS ARE NOT SUITABLE FOR USE WITH CHILDREN LESS THAN 6 MONTHS OLD. • THE LOWEST RECLINE POSITION SHOULD BE USED TO TRANSPORT BABIES. THE BACKREST CAN BE ADJUSTED TO A MORE UPRIGHT POSITION AS THE CHILD GROWS OLDER AND IS ABLE TO SUPPORT IT’S HEAD WITHOUT ASSISTANCE.
Page 14
ADJUSTING THE PIVOTING HANDLE HOLD A To adjust the handle height, squeeze in and hold the buttons on the outside of the handle. Rotate the handle up or down to the desired position then release the buttons. HANDLE ADJUSTMENT BUTTON Instructions for Assembly, Operation and Maintenance...
USING THE TETHER STRAP • THE STROLLER IS DESIGNED FOR USE ON FLAT OR GENTLY SLOPING SURFACES, AND MAY BE UNSTABLE ON HIGHER SLOPING AND UNEVEN SURFACES - USERS SHOULD BE AWARE OF THE POSSIBILITY OF THE STROLLER ROLLING AWAY OR TIPPING OVER. •...
Page 16
SECURING YOUR CHILD HARNESS • ENSURE YOUR CHILD IS SECURED WITH A CORRECTLY ADJUSTED HARNESS. • THE ADJUSTED HARNESS SHOULD CLOSELY FIT THE CHILD. • NEVER LEAVE THE HARNESS BUCKLED WHEN NOT FITTED TO A CHILD IN THE STROLLER, BECAUSE THE HARNESS CAN FORM LOOPS WHICH MAY POSE A STRANGULATION HAZARD.
ADJUSTING THE HARNESS 3 BAR 3 BAR SLIDER SLIDER WAIST STRAP 4 BAR 3 BAR SLIDER SLIDER CROTCH STRAP A Tighten or loosen the shoulder straps and B Tighten or loosen the waist straps, hold crotch strap by sliding the 3 bar slider up or and lift the 4 bar slider and pull the harness down.
USING THE HARNESS PULL PUSH H The stroller seat has 3 sets of harness I To reposition the harness, pull the shoulder slots at different heights to accommodate harness buckle tongue through the desired the child. To change the shoulder harness slot.
USING THE STROLLER PLEASE REFER TO PAGE 4 FOR SMART LIFTING TECHNIQUES IMPORTANT NOTES • Always ensure you bend your knees where appropriate and take due care when lifting the frame. • With your hand through the wrist tether strap loop, push the stroller holding the handle.
Page 20
INSTALLING THE CLICK & GO ADAPTORS (SOLD SEPARATELY) THE CLICK & GO ADAPTORS FOR RIDE LITE MUST BE ATTACHED TO THE STROLLER FRAME BEFORE INSTALL BRITAX SAFE-N-SOUND UNITY BABY ® CAPSULE OR BRITAX B-SAFE 35 INFANT CAR SEAT (NZ MARKET ONLY.)
Page 21
BABY CAPSULE IS 12KG, OR THE BRITAX B-SAFE 35 INFANT CAR SEAT IS 15.8KG. IMPORTANT NOTES • The Britax Safe-n-Sound Unity Neos Baby Capsule, Britax Safe-n-Sound Unity ® ® Baby Capsule Isofix compatible or Britax B-Safe 35 Infant Car Seat (For NZ Market) are the only compatible baby capsules designed to fit the Ride Lite stroller, the Unity Baby Capsule and Britax B-Safe 35 Infant Car Seat to be used with Click &...
Page 22
ATTACHING & REMOVING BRITAX SAFE-N-SOUND UNITY ® BABY CAPSULE (SOLD SEPARATELY) PLEASE NOTE These instructions are for installing and removing the baby capsule on the stroller only. • For installing and proper use of the baby capsule in the car, please follow the instructions manual provided with the baby capsule.
Page 23
ATTACHING & REMOVING BRITAX B-SAFE 35 (NZ MARKET) (SOLD SEPARATELY) PLEASE NOTE These instructions are for installing and removing the baby capsule on the stroller only. • For installing and proper use of the baby capsule in the car, please follow the instructions manual provided with the baby capsule.
FOLDING THE STROLLER PLEASE REFER TO PAGE 4 FOR LIFTING TECHNIQUES IMPORTANT NOTES • Remove the child from the stroller before commencing any folding operation. • Fold the stroller slowly and be careful where you place your hands. • When folding the stroller, be aware of the danger of being injured by moving parts and locking devices during the process.
Page 25
FOLDING THE STROLLER (CONTINUED) A Remove the child from the stroller before commencing any folding operation. B Lock the brakes. (Refer to Page 12) C Lock the swivel wheels. (Refer to Page 12) D Raise the backrest to the fully upright position. (Refer to Page 13) PULL E Close the canopy.
Page 26
Do not continue to use the stroller if unsafe. • All repairs should only be carried out by an authorised Safe-n-Sound ® repairer. Only Safe-n-Sound replacement parts should be used with the ®...
Page 27
CLEANING FABRICS • Removable fabrics may be cleaned using lukewarm water and soap or mild detergent. Rinse thoroughly and allow to dry away from direct sunlight. • Non-removable fabrics can be spot cleaned using a damp sponge and soap or mild detergent.
Page 28
Just like servicing your car or bicycle, prams and strollers also need regular maintenance checks. These checks can improve product performance, extend the life of your stroller and help to provide you and your children a safe and smooth journey. We recommend servicing your stroller every 6 months and completing an inspection once a month.
Did you know? Registering your product online simplifies proof of purchase in the event of a warranty claim. Head to our website to fill out the product registration form: britax.com.au MAKING A WARRANTY CLAIM Your rights under a Britax company warranty are separate from and independent of your rights under the statutory consumer guarantees.
® and workmanship (normal wear and tear excluded) that affects the normal operation of your Safe-n-Sound product. In the unlikely event that you fi nd that your Safe-n-Sound ® ® product does not satisfy this warranty, Britax will (at its option) repair or replace that product within a reasonable period of you making a claim in accordance with this policy.
Page 31
NOTES Instructions for Assembly, Operation and Maintenance...
Page 32
In our constant pursuit of excellence we may alter this product and specification without notice. This product may be covered by Australian and International patents and designs or pending applications. Safe-n-Sound ® a registered trademark and all Safe-n-Sound model ®...