Advertisement
• Safety Instructions
Read the Instructions: Please read all the instructions in this section carefully
before installation or use of the product. All the safety instructions must be followed.
Retain the Instructions: Please retain this Instruction Manual for future reference.
This symbol, wherever it appears, alerts you to the presence of
uninsulated hazardous voltage that may be sufficient to constitute a
risk of electric shock. External wiring to any terminal marked with this
symbol must be done by a trained and instructed person only.
This symbol, wherever it appears adjacent to a component, alerts
you that the concerned component can only be replaced by another
of the exact same specifications.
WARNING
To reduce the risk of electric shock, do not remove the top cover. No user serviceable
·
parts inside. Refer all servicing to qualified personnel only.
Before replacing any fuse, make sure the set is switched off and disconnected from
·
the AC mains or any other power source. Replace a fuse only with another of exactly
same specification.
CAUTIONS
Water & Moisture: To reduce the risk of fire or electrical shock, do not expose this set
to rain or moisture. Do not use this set near water or in a wet location. Do not keep any
object filled with liquid, such as a vase, on top of this set. Do not insert or remove the AC
mains plug with wet hands.
Power Source: The voltage & frequency of the AC mains supply, and the voltage of the
external battery, (if applicable) to which this set can be connected, is marked on the rear
panel of the set. Do not connect this set to any power source other than those specified
on the rear panel.
Power Cord Protection: Do not cut, kink, damage or modify the AC power cord
supplied with this set. Keep the AC power cord away from heaters and harmful
chemicals. Do not keep any heavy object on the power cord.
Operation on Generator: When operating this set on a generator, make sure the set
is switched off till the generator voltage has stabilized.
Stability: This set must be kept in a stable and flat horizontal position, and never in a
tilted position. Do not place this set on an unstable stand, tripod, bracket or mount. Do not
use attachments which are not supplied or explicitly recommended by the manufacturer.
Cleaning: Disconnect this equipment from the AC mains and external battery before
cleaning. Clean with a damp cloth, but do not allow any lequid to enter the set. Do not
clean with liquids or aerosols.
AFT-24F2M
2
Advertisement
