Advertisement
Easy Updater for GC2 | Installa on Instruc ons
An Open File-Security Warning may appear prior to opening so ware. If this
happens select run.
Figure 7. Security Warning-Opening So ware
The program will search for the UPDV Device by pinging ac ve COM ports on the PC.
Figure 8. Pinging Ac ve COM Port on PC
Once the UPDV Device is found, it will display the NO UPDATE IS REQUIRED if the
latest fi rmware is currently installed.
Figure 9. Update is Not Required
• If update IS NOT required of the fi rmware, proceed to upda ng the
Control Panel fi rmware.
• If update IS REQUIRED, the version of so ware being installed will
show up in the status bar.
Figure 10. Firmware Update is Needed
While communica ng with the Firmware Updater Tool, the following events will change on
the display:
• -be- bulk erasing the SPI fl ash
• -fe- individual erasing of SPI fl ash sectors
• 0000 fl ashing address (goes up to 0x1000)
2 Copyright © 2015 Nortek Security & Control
Figure 11. Bulk Erase-Old Firmware is being erased
The 2GIG-UPDV has the ability to fl ash a Control Panel as well as a TS1. Firmware
for both products will be loaded into the 2GIG-UPDV.
Figure 12. Loading Control Panel Firmware
Figure 13. Loading TSI Touchscreen Keypad Firmware
When the update is complete the dialogue box of the programmer will display that
the update is successful and the 2GIG-UPDV will show "done" on the 4-digit display.
Figure 14. Update Completed
Update done
is displayed on the Easy Updater for GC2 screen and eight (8) fast
"beeps" alert user that the fi rmware loading task is complete.
Figure 15. Download Completed on Easy Updater for GC2
d o n
UPDV UPDATE DEVICE FRONT
E
Advertisement
