Adjusting Harness Straps - OXO tot Perch Instruction Manual

3
Chair attachment straps adjust from underneath cushion. To
remove cushion, unbuckle two waist straps (D) from crotch
strap (C) and lift cushion.
5
Ensure both tabs are closed and all straps are
securely attached.
5
4
2
3
1
To ensure both sets of chair attachment straps are tight,
lift locking tabs and pull loose ends of straps until there is
no slack. Secure loose ends of straps by pressing locking
tabs down.
6
To replace cushion, insert crotch strap (C) through opening in
center of cushion. Ensure both waist straps (D) are aligned
with indents in back of cushion. Press down to secure cushion
to Booster.
WARNING
!
• Always secure child with the restraint system to fit child snuggly. Use the restraint system until child is
able to get in and out of the product without help (around 2 ½ years old).
• When child is 3 years of age, Booster can be used without harness straps. Do not remove chair straps.
All straps can be removed for Booster storage.
• The OXO Tot Perch Booster Seat with Straps is not compatible with all chair types. Be sure to test the security
™
of the Booster Seat on the adult chair prior to first use. If the Booster Seat moves forward and backward or
side to side after attachment, do not use on that chair.

Adjusting Harness Straps

1
Test Booster attachment to ensure it is securely attached to chair.
Place child on Booster and place crotch strap (C) between child's
legs. Buckle two waist straps (D) into crotch strap buckle. You
will hear a "click" when buckles lock.
Note: Pull on harness to check that both belts are locked into
the buckle.
2
Adjust waist and crotch straps until child is snug in Booster.
To loosen, slide the strap adjusters towards the center
buckle. To tighten, slide the strap adjusters away from
the center buckle. To remove child, release buckles by
unbuckling two waist harness straps from crotch strap.
Test strap security. Do not leave child unattended.
6