Matrix Telecom SPARSH VP210 Quick Installation Manual

Thank you for choosing SPARSH VP210! Please read this guide first for
correct installation and retain it for future reference. The information in this
guide was current at the time of publication. All specifications are subject to
change without notice.
This Guide is meant to help you install and connect the phone to make and
receive calls. For detailed installation instructions, refer to the System Manual.
Copyright
All rights reserved. No part of this document may be copied or reproduced
in any form or by any means without the prior written consent of Matrix
Comsec Pvt. Ltd.
Warranty
Limited Warranty. Valid only if primary protection is provided, mains supply is
within limit and protected, and environment conditions maintained within
product specifications. Complete warranty statement is available on our
website: www.MatrixTeleSol.com
Know Your SPARSH VP210
1 2 3
abc def
4 5 6
ghi jkl mno
7 8 9
pqrs wxyz
tuv
* 0 #
10
9
8
11
1. LCD Screen 7. Volume Decrease Key
2. Ringer LED 8. Speaker Key
3. Navigation Key/SIP Line Key 9. Mute
4. Context Sensitive Key
10. Headset Key
5. Dial Pad
11. Handset
6. Volume Increase Key
Volume Keys
While talking, Press to increase and press
Speech volume.
When the phone rings, Press to increase and press
decrease Ringer volume.
What Your Package Contains
SPARSH VP210 Phone
Ÿ
Handset with handset cord
Ÿ
Ethernet Cable
Ÿ
Stand
Ÿ
Installing SPARSH VP210
Step 1
SELECT A LOCATION
2
Mount SPARSH VP210 on the Desk
1
3
4
5
Stand
6
7
Attach the Stand
You can attach the Stand in the following ways - at an angle
Ÿ
of 45 degrees and 55 degrees as shown in Image A and
Image B.
Ÿ Stand Attached at 45 Degree angle.
to decrease
to
Image A
Page 1