NBE100 User's Manual_____________________________________
Figure 3 – NBE100 Connection Diagram
2.4.2 Checking Connections
®
Once the NMEA 2000
connections to the NBE100 have been completed, check to see that
®
information is being properly transmitted by using an appropriate NMEA 2000
display to
observe a sensor on the opposite side of the NBE100. If you don't see data from that sensor,
refer to Section 4, "Troubleshooting".
2.5 Configuring the NBE100
The NBE100 will function on the NMEA 2000 network as it is shipped from the factory; no user
configuration is required. The NBE100 features PGN filtering if enabled. Configure the NBE100
using Maretron's N2KAnaylzer®. See details below for information on how to configure your
NBE100.
2.5.1 General Tab
The "General Tab" for the NBE100 features a blank field for entering a Label. Enter any Label
desired in the field such as the NBE100's location on the vessel or an NBE100 reference
number such as "Box 2". See example below of the "General Tab".
NBE100 User's Manual Rev.1.2
5