Advertisement
Available languages
Available languages
Installation
The Kegcooler should not be placed in direct sunlight!
1. The Kegcooler should he installed on a level surface. If you choose
the adjustable legs as an option you can adjust them by means of a
screwdriver.
2. After installation, leave the Kegcooler standing for no less than two
hours before switching on to avoid damaging the compressor.
Refrigerant: R 134a.
3. Voltage: 220 - 240V.
4. For an optimum temperature, install the cooler in a position where
adequate air circulation is guaranteed.
The garantee will be void if the ventilation vents of the product are
partly or wholly obstructed. An unrestricted circulation of air is essen-
tial to ensure optimal cooling performance and a long working life.
5. Clean the condenser at least once a month by means of a vacuum
cleaner or compressed air.
6. The temperature in the Kegcooler can be adjusted by the thermostat
knob. As standard, this thermostat is set at about +4°C. (FK-MUP4:
User manual 1-95721 and 1-95723).
7. The ideal temperature is dependent upon the quantity and temperature
of the products to be cooled and is also affected by the ambient
temperature.
8. Don't place heavy objects on the cover plate.
24
Advertisement
