Advertisement
Drying programmes
Filling the detergent
Starting the programme (button 8)
Press button 8 to start the programme. The corresponding red pilot light stops blinking.
The pilot light A is on to indicate that the appliance starts operating.
•
The pilot light C is on to indicate the door is locked.
•
Press button 8 to interrupt a programme. The corresponding red pilot light starts blinking. Press button 8 again to
restart the programme from the point at which it was interrupted
If you set an incorrect option, the yellow pilot light of the button 8 blinks for 3 times. The display shows the message
Err.
Setting the DELAY START (button 9)
Press this button again and again to set the required delay.
The display shows the set delay time (up to 20 hours), then shows the duration of the programme again.
Advertisement
