Intertek Acme Solat Impulse User Manual page 57

Check if the CTO Hall elements is in poor contact with the lead of the PCB board or disconnected.
Check if the CTO motor is damaged.
Check if there is any damage to the circuit of the CTO motor drive board.
10. Gobo1/2 Reset Error
Check if the position of the gobo wheel1/2 mounting magnetic steel falls off or is damaged.
Check if there are other interference items in the gobo wheel1/2 operating range.
Check if the gobo wheel1/2 Hall elements is damaged.
Check if the gobo wheel1/2 Hall elements is in poor contact with the lead of the PCB board or
disconnected.
Check if the gobo wheel1/2 motor is damaged.
Check if there is any damage to the circuit of the gobo wheel1/2 motor drive board.
11. RGobo1 Reset Error
Check if the position of the gobo wheel1 mounting magnetic steel falls off or is damaged.
Check if there are other interference items in the gobo wheel1 operating range.
Check if the gobo wheel1 Hall elements is damaged.
Check if the gobo wheel1 Hall elements is in poor contact with the lead of the PCB board or
disconnected.
Check if the gobo wheel1 motor is damaged.
Check if there is any damage to the circuit of the gobo wheel1 motor drive board.
12. Prism1/RPrism1 Reset Error
Check if the position of the prism1 mounting magnetic steel falls off or is damaged.
Check if there are other interference items in the prism1 operating range.
Check if the prism1 Hall elements is damaged.
Check if the prism1 Hall elements is in poor contact with the lead of the PCB board or
disconnected.
Check if the prism1 motor is damaged.
Check if there is any damage to the circuit of the prism1 motor drive board.
13. Zoom Reset Error
Check if the position of the zoom mounting magnetic steel falls off or is damaged.
Check if there are other interference items in the zoom operating range.
Check if the zoom Hall elements is damaged.
Check if the zoom Hall elements is in poor contact with the lead of the PCB board or disconnected.
56F