Intertek Acme Solat Impulse User Manual page 13

Offline Mode
To select Offline Mode, press the ENTER button to confirm. Use the UP/DOWN button to select
Hold or Blackout, press the ENTER button to store. Press the MENU button back to the last menu or
let the unit idle 30 seconds to exit menu mode.
Network
To select Network, press the ENTER button to confirm. Use the UP/DOWN button to select Manual
or DHCP, press the ENTER button to store. To select Manual, press the ENTER button to confirm.
Use the UP/DOWN button to select IP Address, Subnet Mask or Gateway, press the ENTER button
to store. Press the MENU button back to the last menu or let the unit idle 30 seconds to exit menu
mode.
Art-Net
To select Art-Net, press the ENTER button to confirm. Use the UP/DOWN button to select Net,
Sub-Net or Universe, press the ENTER button to store. Press the MENU button back to the last
menu or let the unit idle 30 seconds to exit menu mode.
sACN
To select sACN, press the ENTER button to confirm. Use the UP/DOWN button to select Universe or
Priority, press the ENTER button to store. Press the MENU button back to the last menu or let the
unit idle 30 seconds to exit menu mode.
Repeat On DMX
To select Repeat On DMX, press the ENTER button to confirm. Use the UP/DOWN button to select
No or Yes, press the ENTER button to store. Press the MENU button back to the last menu or let the
unit idle 30 seconds to exit menu mode.
View DMX Value
To select View DMX Value, press the ENTER button to confirm. Use the UP/DOWN button to view
the DMX channel value. Press the MENU button back to the last menu or let the unit idle 30
seconds to exit menu mode.
Fixture Setting
To select Fixture Setting, press the ENTER button to confirm, use the UP/DOWN button to select
Pan Inverse, Tile Inverse, P/T Feedback, Dimmer Speed, Dimmer Curve, Focus Compensate, Power
Mode or Bright Calibration.
12F