JST CN-SAP1190 Manual

CN
Disconnectable Crimp style Wire-to-wire connectors
Connector for the GPS antenna system of
the car navigation system. The CN
connector applies the unique crimping
method to the shielding meshed wires,
which will result in superior high-
frequency characteristics.
CONNECTOR
Features ––––––––––––––––––––––––
• Cost effective
Less expensive than the conventional high-frequency
connectors.
• Crimping method and shape
Shielding meshed wires are crimped with the N-type crimp
shape, which prevents the deflection and coming off of the
meshed wires.
• Superb high-frequency characteristics
This connector can keep low VSWR characteristics, while
serving high-frequency characteristics.
Specifications –––––––––––––––––––
• Current rating:
• Voltage rating:
• Temperature range: -30˚C to +105˚C
• Contact resistance: Initial value/30m Ω max.
• Insulation resistance:
• Withstanding voltage:
• Applicable wire:
Inner conductor cross sectional area /0.05 to 0.2mm
Outer conductor O.D. /0.85 to 2.2mm (.033" to .087")
Sheath O.D. /1.45 to 3.3mm (.057" to .130")
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
1.0A AC, DC max. (AWG #25)
250V AC, DC max.
(including temperature rise in applying
electrical current)
After environmental testing/60m Ω max.
100M Ω min.
1,000V AC/minute
2
855