Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the green
indicator may be rapidly flashing).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the button for 10-15 seconds until the green indicator
flashes rapidly.
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Electrical > Plug with
Energy Meter).
7.
Ensure that the device is in pairing mode, with the green indicator flashing rapidly,
and tap "Confirm light is rapidly flashing".
Advertisement
