Lagrange Hemisphere 509 Manual page 47

The water will start to warm up.
The boiling at °C will be maintained for
100
Once the boiling has finished, the kettle will beep
off automatically. The "PURE" button and the water level indicator
will go off.
The water temperature will then be displayed on the screen.
This mode can be cancelled by simply pressing the "PURE" button.
Heat the water to a pre-defined temperature and maintain
*
it at this temperature:
Press the temperature selection button to display the possible
temperatures and choose between
selection button and the water level indicator go on.
The temperature chosen will blink on the screen.
The water will start to heat up and the display on the screen will go
to the instantaneous temperature of the water.
The temperature selected can be seen by the point positioned facing
the temperature.
Once the selected temperature has been reached, the kettle will beep
and keep the water at this temperature automatically for
and then turn off.
The temperature selection button and the water level indicator
will go off.
The temperature of the water will then be displayed on the screen.
This mode can be cancelled by simply pressing the temperature
selection button.
minutes.
3
times and go
5
, , or °C. The temperature
50 60 70 85
minutes
30
Boil the water and then lower it to a predefined temperature
*
and maintain this temperature:
Press the temperature selection button to display the possible
temperatures and choose between
the °C button. The temperature selection button, the
100
button and the water level indicator light up.
The temperature chosen will blink on the screen.
The water will then begin to heat up and the displaying on the screen
goes to the instantaneous temperature of the water.
The temperature selected can be seen by the point facing
the temperature.
Once the boiling begins, the kettle will beep
button will go off.
The water temperature will then progressively go down, which can
take time, be patient!
Once the selected temperature has been reached, the kettle will
beep and keep the water at this temperature automatically for
minutes and then go off.
30
The temperature selection button and the water level indicator
will go off.
The temperature of the water will then be displayed on the screen.
The boiling mode can be cancelled by simply pressing the
The temperature selection mode can be cancelled by simply pressing
the temperature selection button.
47 47
EN G
, , or °C. Then press
50 60 70 85
°C
100
times. The °C
5 100
°C button.
100