Related Manuals for Sunhans SHFiM2-Lite
Summary of Contents for Sunhans SHFiM2-Lite
- Page 1 SHFiM2-Lite Mesh Router user Manual For more information, please visit: www.sunhans.com Or contact us via email: info@sunhans.com Page - 26...
-
Page 2: Product Overview
Wi-Fi signal throughout your home. This manual describes how to manage your SHFiM2-Lite Wi-Fi System from your SHFiM2-Lite router web interface. You can know how to connect your mesh node. You can use the status lights on the front of the... -
Page 3: Connect Your Router
Reset Button router to factory setting. Wait for 30 seconds for on your SHFiM2-Lite router. Note: If you want to connect your SHFiM2-Lite the restart process to nish or to be completed router to an existing gateway, we recommend that you turn o your existing gateway’s Wi-Fi. -
Page 4: Red Solid
2.2 Place Your Node Status Light Description If your Node came with your SHFiM2-Lite Wi-Fi System, the node attempts to sync The SHFiM2-Lite router and Node successfully synced, Blue solid and the connection between the SHFiM2-Lite router with your router automatically. If you bought an add-on node, you must manually and SHFiM2-Lite node is good. -
Page 5: Specify Your Internet Settings
4.Specify Your Internet Settings network. The Wi-Fi network name is on the router label. The Wi-Fi network name is the same for the router and the node in the SHFiM2-Lite Wi-Fi System. 4.1 Quick installation Guide 3. Join the Wi-Fi network and enter the Wi-Fi password. The password is on the router label. - Page 6 and setting your Wi-Fi name and password, Click save. 3. Enter password. The password is 12345678. The BASIC Home page displays. If you connect your internet by wired cable , you can back to Mesh interface and check Status , if wan port have parameter，you can surf the internet. Or if you connect your internet by Wi-Fi, you can reconnect the new SSID and try to surf the internet directly.
- Page 7 Field Description Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned. The Static IP There are two buttons to choose from: gateway is the ISP router to which your router 1. When choosing OFF, there are two bands, connects.
- Page 8 Control Sideband Control Sideband You can choose upper or lower You can choose upper or lower Select the channel you want to use from the Select the channel you want to use from the drop-down list. This eld determines which drop-down list.
-
Page 9: Enable Mac Filter
6.Access Firewall Setting 6.1 Access DMZ Setting The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address Translation (NAT). The router is programmed to recognize some of these applications and to work correctly with them, but other applications might not function well. -
Page 10: Set Up Parental Controls
your laptop for an important video conference and want to avoid a dropped call, you can set your laptop as high-priority during the time of your video conference. 6.4 Setup Parental Controls Parental Control enables you to limit online time, block inappropriate contents for each family member, and pause WiFi on kids’... -
Page 11: Manage Your Network
to change these settings if you need a speci c IP subnet that one or more devices Guaranteed minimum bandwidth. Set the on the network uses, or if you use competing subnets with the same IP scheme. Uplink and Downlink bandwidth minimum guaranteed value Change the LAN Interface settings: Mode... - Page 12 network and automatically connects you. If your ISP assigns a private WAN IP address(suchas192.168.x.xor10.x.x.x),the Dynamic DNS service does not work because private addresses are not routed on the Internet. Set Up a New Dynamic DNS Account To set up Dynamic DNS and register for a free account: 7.4 Setup DNS Access the Home page >...
-
Page 13: Update The Router Firmware
Access the Home page > Select Management > Select Upgrade Firmware resetting the router to factory settings. (The reset and restart process typically Click the Select File button and nd the .bin le supplied by Sunhans, then takes about twenty seconds.) click Upload.
Need help?
Do you have a question about the SHFiM2-Lite and is the answer not in the manual?
Questions and answers