Table of Contents
Advertisement
1.
Unpacking
For safe and pleasant use of the conveyor, install it in a location that satisfies the "Installation
Environment" and "Installation Space". This section also describes the installation precautions. Make
sure to read the following before use.
Checking the Installation Location
Consider the following environmental conditions before selecting the conveyor installation location.
Installation Environment
Install in a location where the temperature and
humidity are within the following ranges.
Ambient temperature: 10 °C to 32 °C (50 °F to
89.6 °F)
Ambient humidity: 20 % to 80 %RH (relative
humidity)
Max. wet-bulb temperature: 25 °C (77 °F)
Memo
z Make sure there is no condensation.
z If installing in a location where the ambient humidity is
30 % or less, use a humidifier or static electricity
prevention mat.
Installation Space
Select a location that can support the weight of
the conveyor and make sure the area around
it has the following space (the total weight is
approx. 27.5 kg*).
*: Including accessories such as the base, rear
stacker, stand (lower), and stand (upper).
Note
z Install the conveyor horizontally on the same flat surface
as the printer.
z Do not adjust the printer's height by using any objects
other than expansion trays. Make sure to use the printer's
optional expansion trays.
- 9 -
Advertisement
Table of Contents
