Sony Cyber-shot DSC-T30 User's Manual / Troubleshooting page 103

Enable printer to connect
[USB Connect] is set to [PictBridge],
•
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
The connection is not established.
•
Disconnect and connect the cable for
multi-use terminal again. If an error
message is indicated on the printer, refer
to the operating instructions supplied
with the printer.
Connect to PictBridge device
You tried to print images before the
•
printer connection was established.
Connect to a PictBridge compliant
printer.
No printable image
You tried to execute [DPOF image]
•
without placing a DPOF (Print order)
mark on the image(s).
You tried to execute [All In This Folder]
•
while a folder that holds only movies
was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
Check the printer.
•
Printer error
Check the printer.
•
Check if the image you want to print is
•
corrupted.
The data transmission to the printer may
•
not be completed yet. Do not disconnect
the cable for multi-use terminal.
Processing
The printer is canceling the current print
•
job. You cannot print until it is finished.
This may take time, depending on the
printer.
No image for Slide Show
The selected folder does not contain a
•
file that can be played in a Slide Show
with music.
Music Error
Delete the Music file, or replace it with
•
a normal Music file.
Execute [Format Music], then download
•
a new Music files (page 59).
Format Music Error
Execute [Format Music] (page 59).
•
103